Introduction of tailings recovery machine:
Tailings recovery machine is very suitable for the efficient recovery and utilization of the magnetic materials from waste slurries. Its magnetic system is made up of a group of bare-mounted magnets, which are arranged according to a certain gap. And it has a direct effect on the magnetic materials. Under strong magnetic field intensity and a large gradient effect, the recovery rate can be as high as 85%-95%. In particular, with the V-shaped scraper and their self-gravity, the magnetic materials can be discharged without water or less water. This machine is widely used in metallurgy, mining, nonferrous metals, gold, building materials, electricity, coal preparation plants, iron and steel plants (steel slag), sintering plants and etc.
Features of tailings recovery machine:
1. Strong magnetic intensity
2. Low energy consumption
3. High efficiency and stable performance
Application of tailings recovery machine:
Tailings Reclaimer of permanent magnetism is a kind of mechanical equipment in wet separation of the materials of strong magnetism in the granular of powder situation. This machine is used for recovering tailings in iron ore process. It does not run off mineral powder to make full use of effective resources.
Working principle of tailings recovery machine:
Tailings Recovery Machine is composed of five main parts which are magnetic plates, ore-unloading equipment, ore collector, chute and body frame. After the pulp flows into the chute from one port of it, the magnetic materials will be absorbed on the surface of the magnetic plate fixed in the chute, and the nonmagnetic pulp will be discharged from the other port of it. Under the action of rotating magnetic plates, the magnetic materials are exposed from the pulp level and enter the unloading area. Being thrown into the ore collector by the ore-unloading chute, the magnetic materials will be collected and output by the ore collector.
Main Technical Parameters:
Type | Capacity（t/h） | Motor power（kw） | Overall dimensions LxWxH（mm） |
GX-6 | 1-2.5 | 2.2 | 1700X1500X1350 |
GX-8 | 1.5-4 | 3 | 1700X1600X1350 |
GX-12 | 3.5-14 | 5.5 | 1750X2200X1400 |
Note: The technical parameters above are just for your reference. If there is any change, all parameters and overall dimension are subject to operating instructions. Any questions please feel free to contact us.
