Vertical Compound Crusher

Vertical Compound Crusher

Introduction

Vertical Compound Crusher is designed mainly for grinding of cement raw materials (limestone) and cement clinker in cement factories. It can be used for grinding middle hard ores such as iron ore, aluminum ore, grit stone, gypsum, blast furnace slag, coal harangue, phosphorus ore, and lump coal. Also, it can be used in the field of building materials, mining industry, metallurgy, coal and chemical industry.

Features

1. The production capacity is big.

2. The crushing ration is high and the power consumption is low.

3. The seal ability is good and machine running is stable.

4. The maintenance is simple

Working principle

   The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force.

   Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats.

The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. Finally the materials are gradually crushed into needed sizes and come out.

Main Technical Parameters: